GE PD 715 Serie Manuel D'utilisation page 9

Getting started
Start Dishwasher
6
Start Press the Start pad and close the door within 4 seconds to start the cycle or begin the Delay
Hours countdown. The wash cycle will begin shortly after closing the door. The display will turn
off if the door remains open for two minutes. To activate the display, close and open the door or
press any pad.
Interrupt or To interrupt or pause a dish cycle, slowly open the door. Opening the door will cause the wash
Pause cycle to pause. The dishwasher will beep every minute to remind you to close the door. To restart
or resume the cycle, press Start, and close the door within 4 seconds.
Cancel To cancel a wash cycle, press and hold the Start pad for 3 seconds and close door.
The dishwasher will drain, emit a beep sound, and the wash cycle light will turn OFF.
Cycle Indicator Lights and Sounds
7
Sanitized Displayed at end of the cycle when Wash Temp Sani or Sanitize Temp has been selected and
dishwasher has met requirements for sanitization. See Wash Temp Sani or Sanitize Temp, for
complete description. Closing door or pressing any pad will turn off light.
Clean Displayed when a wash cycle is complete. The light stays ON as a reminder that the dishes are
clean. The light will turn off when the door is opened.
Cycle The indicator light on the door front will change color to indicate the wash status. During the
Status wash cycle, the indicator light will be amber or blue. When the wash cycle is complete, the light
(on some will change to white.
models)
Sounds The dishwasher will emit a sound to indicate cycle completion, pad presses, and door ajar.
Mute To turn the dishwasher control sounds ON/OFF, press the Dry Boost pad 5 times within 5
seconds.
Sabbath/ To turn this option ON/OFF, press and hold the Cycle Select and Wash Temp Boost pads for 5
Door seconds, close the door and wait 3 minutes for the dishwasher to go into sleep mode. In the OFF
Wake Up mode, the control display, control sounds, and interior lights
Mode to the door opening/closing. This mode can be used when observing certain religious holidays
(on some such as the Sabbath. To activate the control and interior lights
models)
Smart Connecting your dishwasher to SmartHQ will unlock enhanced capabilities and information
Assist for the Smart Assist feature to maintain optimal wash and dry performance. Smart Assist is
(on some designed to monitor your dishwasher's functionality and will help ensure optimal performance.
models)
See section Appliance Communication for instructions on how to connect.
49-4000283 Rev 2
(on some models) will not respond
(on some models), press any pad.
9