Télécharger Imprimer la page

Samsung BD-C5300 Mode D'emploi page 39

Masquer les pouces Voir aussi pour BD-C5300:

Publicité

Les langues disponibles

Les langues disponibles

10.
When done, press the YELLOW(C) button
on your remote, or move to the Done button,
and then press the ENTER button.
The Network Connecting screen appears.
11.
Wait until the connection confirmation
message is displayed, and then press the
ENTER button. The Network Settings screen
reappears.
12.
To test the connection, press the ▼ button
to select Network Test, and then press the
ENTER button.
Setting Up the Wireless Network Connection
- Manual
If the Auto Setting does not work, you need to
enter the Network settng values manually.
To get the Network setting values from most
Windows computers, follow these steps:
1.
Right click the Network icon on the bottom
right of the screen.
2.
In the pop-up menu, click Status.
3.
On the dialog that appears, click the Support
tab.
4.
On the Support tab, click the Details button.
The Network settings are displayed.
To Enter the Network settings into your product,
follow these steps:
1.
On the Internet Protocol Setup screen, press
the ENTER button.
2.
Press the ▲▼ buttons to select Manual, and
then press the ENTER button.
3.
Press the ▼ button to go to the first entry field
(IP Address).
Settings
Network Setting
Display
Access Point Selection : Not Selected
Audio
Internet Protocol Setup : Manual
System
IP Address
Network
Subnet Mask
Language
Gateway
Security
DNS
General
DNS Server
Support
PBC (WPS) > Move " Select ' Return
a
\
: 0
0
0
0
: 255 255 255
0
: 0
0
0
0
: Manual
: 0
0
0
0
4.
Use the number buttons to enter numbers.
5.
When done with each field, use the ► button
to move successively to the next field.
You can also use the other arrow buttons to
move up, down, and back.
6.
Enter the IP Address, Subnet Mask, and
Gateway values.
7.
Press the ▼ to go to DNS.
8.
Press the ▼ button to go to the first DNS
entry field. Enter the numbers as above.
9.
When done, press the ▲ button to return to
Access Point Selection. Select the network,
and then press the ENTER button.
10.
Go to Step 6 in the Automatic Wireless
procedure above, and follow the directions
from that point on.
Network Test
Use this menu to connect the wired network
or check whether your network connection is
working or not.
Network Status
Check whether a connection to the network and
the Internet have been established.

English

Publicité

loading