Avanti WCR5450DZ Manuel D'instructions page 10

It is recommended you install the Wine Chiller in a place where the ambient temperature is
between 72-78 degrees Fahrenheit. If the ambient temperature is above or below recommended
temperatures, the performance of the unit may be affected. For example, placing your unit in
extreme cold or hot conditions may cause interior temperatures to fluctuate. The range of 40-65
degrees Fahrenheit may not be reached.
Recommended Temperatures for Chilling
Red Wines
Dry / White Wines
Rose Wines
Sparkling Wines
 ON/OFF POWER
To turn ON or OFF the appliance, press the ON/OFF button
The LED readout will show the original temperature set previously (the preset temperature at the
factory for TOP ZONE is 50ºF/10ºC and for BOTTOM ZONE is 60ºF/16ºC).
You can select temperature display setting from Fahrenheit to Celsius degree by pushing the ºF/ºC
button. Fahrenheit or Celsius degrees indicators will appear in blue color in the temperature
display windows for each zone.

SETTING THE TEMPERATURE CONTROL
You can press UP
Before setting temperature, you need to press SET button to select the desired temperature
zone first. The degrees indicators will appear in the display windows marked TOP ZONE and
BOTTOM ZONE.
•
Top Zone.
Then press the UP
The LED indicator on the TOP ZONE display will flash
•
Bottom Zone.
Then press the UP
The LED indicator on the BOTTOM ZONE display will flash
•
The temperature that you desire to set will increase 1ºF or 1ºC if you push the UP
once, on the contrary the temperature will decrease 1ºF or 1ºC if you push the DOWN
button once.
OPERATING YOUR WINE CHILLER
Wine.
59 - 65 ºF 15 - 18 ºC
50 - 55 ºF 10 - 13 ºC
49 - 51 ºF 9 – 11 ºC
40 - 47 ºF 5 - 8 ºC
or DOWN buttons to get the desired temperature in each zone.
or DOWN buttons to get the desired temperature in the top zone.
or DOWN buttons to get the desired temperature in the top zone.
10
.
button