Silhouette Pro Gen 3 Manuel Du Propriétaire page 19

TROUBLESHOOTING
Hours of operation:
Monday to Thursday 8:30 am - 6:00 pm Eastern Standard Time
Friday 8:30 am - 4:00 pm Eastern Standard Time
Information in this manual is subject to change without notice.
PROBLEM
Does not operate
Internal temperature not cold enough
Appliance runs continuously
Alarm sounding and "HI" on the display panel
Turns on and off frequently
Light does not work
Vibrations/Noisy
Condensation on the cabinet or door
Alarm sounding and "LO" or "CL" on the display
panel
Silhouette Consumer Care: 1-844-455-6097
18
POSSIBLE CAUSE
• A fuse may be blown or the circuit breaker
tripped
• Plug not fully inserted into the wall outlet
• Door is not shut properly or opened excessively
• Exhaust vent is obstructed
• Recently added a large quantity of warm bottles
to the cabinet
• Close proximity to heat source or direct sunlight
• Ambient temperature or humidity is very high
• Possible system leak, evaporator fan failure or
compressor failure
• Door is not shut properly or opened excessively
• Overload of cabinet
• Close proximity to heat source or direct sunlight
• Ambient temperature is hotter than normal
• Bulb has burned out
• Light button is "OFF"
• Unit is not level
• Refrigerant moving within system can cause a
gurgling noise. This is normal
• Door is not shut properly or opened excessively
• Ambient temperature or humidity is very high
• Ambient temperature is excessively low
• Sensor failure
• Evaporator temperature is too low