Silhouette Pro Gen 3 Manuel Du Propriétaire page 12

OPERATING INSTRUCTIONS
SHELF INSTRUCTIONS
Bottle Rest
Bottles are placed on top of the flexible 'Bottle Rest'
components to keep them in position. The Bottle
Rests can slide side-to-side to allow for variable
spacing of different shaped bottles and can also
detach from the wooden racking and be moved to
another location.
Easel Display
The retractable Easel Display presents a row of
bottles at an angle in order to showcase them
through the glass door. To set up the display:
• Remove any bottles from the shelves you are
setting up.
• Remove the split half shelf above the display
shelf by lifting it up and slightly towards you.
• On the display shelf, rotate the chrome bar at
the front up and back fully until it rests against
the stops.
• Unclip the front row of Bottle Rests from the
wooden racking and clip them onto the chrome
bar
• Prop the desired bottles against the Bottle Rests
on the bar, with the bottom of the bottles resting
against the front shelf trim.
• To convert the shelf back to flat storage, reverse
the process.
Depending on bottle diameter, there may be room
for up to 6 bottles across the width of the Easel
Display. There is also room for a back row of bottles
on the display shelf and the remaining half shelf
above. Depending on bottle type, positions may
need to be adjusted to allow clearance for the neck
of the bottles.
The removed half shelf can be stored either in the
bottom of the cabinet, or away from the unit in the
accessory bag provided.
11