Silhouette Pro Gen 3 Manuel Du Propriétaire page 13

OPERATING INSTRUCTIONS
DOOR REVERSAL INSTRUCTIONS
MODEL SPRWC052D3SS
If the appliance is placed on its back or side for any length of time during this process, it must be allowed
to remain upright for 6 hours before plugging it in to avoid damage to the internal components.
This appliance has the capability of the door opening from either the left or right side. The appliance
is delivered to you with the door opening from the left side. Should you desire to reverse the opening
direction, please follow the instructions below.
1. Open the door at 90 degrees, release the decorative nail on the left side. See figure 1.
2. Fix the screw, please don't fasten the screws. See figure 2.
3. Release all the screws for the upper hinge and lower hinge, remove the hinge cover covers for both
upper and lower door hings. Install the upper door hinge cover (7) at the bottom left corner. See figures
3 & 4.
4. Remove the decorative cover and lock hook on the upper and lower door frame respectively. Install the
lock hook on the upper door frame and the decorative cover on the lower door frame. See figure 1 &
4.
5. Rotate the door 180 degrees, insert the upper/lower hinge into the screws, see figure 2. Reattach
the previously removed lower door hinge cover (8) to the top left corner, then fix the screws. Affix the
decorative nail on the right side. See figure 5.
1. Decorative Nail
2. Door
3. Hinge
4. Screw
12
5. Latch Hook
6. Decorative Cover
7. Hinge Cover Top
8. Hinge Cover Bottom