GreenWorks Commercial 82ST12 Manuel D'opérateur page 12

EN
10.6 ASSEMBLE THE TRIMMER HEAD
1. Put the metal rod in the motor housing hole to fix
the trimmer head.
2. Assemble the trimmer head.
3. Turn the trimmer head counterclockwise to
tighten it.
4. Remove the metal rod.
You must install the cut-off blade when you use the
trimmer head.
11 TRANSPORTATION AND STORAGE
11.1 MOVE THE MACHINE
When you move the machine, you must:
• Wear gloves.
• Stop the machine.
• Remove the battery pack.
• Assemble the blade guard.
11.2 STORE THE MACHINE
• Remove the battery pack from the machine and
charge it.
• Make sure that children cannot come near the
machine.
• Keep the machine away from corrosive agents such
as garden chemicals and de-icing salts.
• Secure the machine during transportation to prevent
damage or injury. Clean and examine the machine
for any damage.
12 TECHNICAL DATA
Type
Motor
No load speed
Cutting line diameter
Cutting path diameter
Feed Type
Weight (without battery
pack)
Battery model
IMPORTANT
Cordless, battery pow-
ered
82V DC Brushless
5000-6000 ±10% RPM
0.095" (2.4 mm)
16" (40 cm)
Bump Feed
8.82 lbs. (4kg)
82BD250, 82BD400,
82BD500, 82BD800 and
other Greenworks Com-
mercial 82V batteries
English
Charger model
IPX
The recommended ambient temperature range:
Item
String trimmer storage
temperature range
String trimmer operation
temperature range
Battery charging temper-
ature range
Charger operation tem-
perature range
Battery storage tempera-
ture range
Battery discharging tem-
perature range
12
GC 400 / 82DPC8A /
82CH62K and other
Greenworks Commercial
82V chargers
IPX5
Temperature
32°F (0°C) - 113°F
(45°C)
32°F (0°C) - 113°F
(45°C)
39°F (4°C) - 104°F
(40°C)
39°F (4°C) - 104°F
(40°C)
32°F (0°C) - 113°F
(45°C)
32°F (0°C) - 113°F
(45°C)