Publicité
Les langues disponibles
Les langues disponibles
EN
diminishes. This will maintain best performance and
keep line long enough to advance properly.
9.6
ADJUST THE LENGTH OF THE CUTTING
LINE
While you operate the machine, the cutting line gets
worn shorter. You can adjust the length of the cutting
line.
1.
While the trimmer is running, bump the trimmer
head against the ground.
2.
Line is automatically released and the cut-off
blade cuts the excess length.
10
MAINTENANCE
Read and understand the safety regulations and the
maintenance instructions before you clean, repair or
do the maintenance work on the machine.
Make sure that all nuts, bolts, and screws are tight.
Check regularly that the handles are firmly mounted.
Use only the replacement parts and accessories of
the initial manufacturer.
10.1
GENERAL INFORMATION
Only your dealer or approved service center can do
the maintenance that is not given in this manual.
Before the maintenance operations:
• Stop the machine.
• Remove the battery pack.
IMPORTANT
IMPORTANT
IMPORTANT
IMPORTANT
English
• Cool the motor.
• Use correct clothing, protective gloves, and safety
glasses.
10.2
CLEAN THE MACHINE
• Clean the machine after each use with a moist cloth
dipped in neutral detergent.
• Do not use aggressive detergents or solvents like
"glass cleaner" to clean the plastic parts or handles.
• Keep the trimmer head free from grass, leaves, or
excessive grease.
• Keep the air vents clean and free of debris to avoid
overheating and damage of the motor.
• Do not spray water onto the motor and electrical
components.
10.3
REMOVE THE REMAINING LINE
1.
Push the tabs (1) on the sides of the trimmer
head at the same time.
2.
Pull and remove the spool cover (2) and spool
(3).
1
10
2
3
4
5
Publicité
