Publicité
Les langues disponibles
Les langues disponibles
Adjustments and settings in the menu (continued)
[1-2-1] Sharpness
Use this function to set video image contours and overall sharpness
according to your preference.
Use the UP and DOWN keys to select items. Press the [BACK] key to
return to the previous screen.
Items
Sharpness
Detail Enhance
[1-2-2] Custom Gamma
Use this function to create your preferred gamma curve.
Select CUSTOM 1, 2 or 3 using the UP and DOWN keys, then press
the [OK] key to set and adjust each item. Press the [BACK] key to
return to the previous screen.
Items
Custom 1~3
Correction Value
Gamma Adjustment
White
Red
Green
Blue
Reset
Explanation, operation, precautions, settings
Emphasizes the outlines of video images. Please adjust to your preference.
Settings: 0 to 50 (clear)
It makes minute details of the video images stand out. Please adjust to your preference.
Settings: 0 to 50 (strong)
Explanation, operation, precautions, settings
[1] It is possible to select a gamma curve adjustment for Custom 1, 2, and 3 under the
"Gamma" of the picture adjust and then save it.
Please adjust to your preference.
(*) Custom 1, 2, 3 cannot be configured during 3D signal input and when the "Picture
Mode" is set to 3D.
(*) Initial values of Custom 1, 2, and 3 are the same as for "Normal".
(*) Please refer to the figure at the bottom of the menu in two frames for adjustment.
(*) It is recommended that you read "Gamma Curve" (Reference page: 61) for hints about
adjustment.
You can choose to add the underlying gamma curve adjustment.
(*) Can choose any setting, as the default gamma curve will always appear linear.
Settings: Normal, A, B, C, D
(brightens in particular dark to intermediate parts) 1.8 to 2.6 (darkens in particular dark to
intermediate parts) in the range of values with increments of 0.1
The gamma curve for "green" is being displayed as being representative. If "white", "red,"
"green" or "blue" are selected, the corresponding color curves are displayed.
Place the cursor on a gamma curve with 12 points with the buttons for left and right, and
then use the buttons for up and down buttons to move those points up or down.
Red, green and blue can be adjusted at the same time.
It is possible to adjust the gamma curve of red.
It is possible to adjust the gamma curve for green.
It is possible to adjust the gamma curve for blue.
The same data as for the "Normal" mode are used.
(*) When you exit the adjustment menu of Custom Gamma, please save the adjustment
values.
You can return to the original data, which should be saved.
ENGLISH
Sharpness
>>
Sharpness
25
Detail Enhance
0
Custom Gamma
>>
Correction Value
Custom1
Normal
1023
White
Custom2
Red
Custom3
Green
Blue
512
Reset
0
50
100(%)
[Normal]
51
Publicité
