Pattfield Ergo Tools PE-AA 20 Li Traduction De La Notice Originale page 81

Technical Data
TREE PRUNING SAW
Nominal voltage
No load speed (n )
0
Stroke length
Max. cutting capacity
Weight
Sound pressure level (L )
pA
Sound power level (L )
WA
Max. vibration emission (a )
hd
SUITABLE BATTERIES
Voltage
Capacity
SUITABLE CHARGER
Nominal voltage
Output voltage
Charging time
Operation temperature
Protection Class
Weight
160 EN
PE-AA 20 Li
20 V
2700 bpm
20 mm
Wood 80 mm
Steel 10 mm
1.14 kg
82.5 dB(A) Uncertainty K = 3 dB(A)
94.5 dB(A) Uncertainty K = 3 dB(A)
9.6 m/s / Uncertainty K = 1.5 m/s
2 2
PE-AK2, PE-AK4
20 V
PE-AK2 (6801240): 2.0 Ah Li-ion battery
PE-AK4 (6801241): 4.0 Ah Li-ion battery
PE1H
100-240 V ~ 50/60 Hz, 78 W
14.4-20 V , 3,0 A
60 min for PE-AK2
120 min for PE-AK4
10-40 °C
/ II
0.25 kg
Noise & Vibration
The declared vibration total value and the de-
clared noise emission values have been meas-
ured in accordance with a standard test meth-
od (EN 62841-1 & EN 62841-2-11) and may
be used for comparing one tool with another.
The declared vibration total value may also be
used in a preliminary assessment of exposure.
Caution! The vibration and noise
emission during actual use of the
power tool can differ from the declared to-
tal value depending on the ways in which
the tool is used, in particular, what kind of
work piece is machined.
It is necessary to identify safety measures to
protect the operator that are based on an es-
timation of exposure in the actual conditions
of use (taking account of all parts of the op-
erating cycle such as the times when the tool
is switched off and when it is running idle in
addition to the trigger time)
Try to minimize the impact of vibration and
noise. Exemplary measures to reduce vibra-
tion exposure include wearing gloves while
using the tool, limiting working time, and using
accessories in good condition.
Residual risks
Even if you are operating this product in
accordance with all the safety require-
ments, potential risks of injury and dam-
age remain. The following dangers can
arise in connection with the structure and
design of this product:
1. Injuries and damage to property due to
broken application tools.
2. Danger of injury and property damage
caused by flying objects.
3. Lung damage if no suitable protective dust
mask is used.
4. Damage to hearing if no suitable ear pro-
tection is used.
5. Health damage caused by hand-arm vibra-
tions if the equipment is used over a pro-
longed period oris not properly guided and
maintained.
EN 161