Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLING THE MILK FROTHER
ATTACHMENT
Before first use, clean all parts and accessories. (See "Care and Cleaning" section).
1
Assembling Milk dispenser: Remove
the Storage container and insert the Milk
dispenser tube. Then, replace the Storage
container.
Tip: Wet end of Milk dispenser tube with
fresh water to aid in assembly.
3
As desired, fill the Milk Tank (max. 17 oz)
with the cold milk and replace the Milk
tank lid.
Also, you can directly immerse the Milk
hose in any milk container or milk bottle.
5
Your Espresso Machine with the Milk
Frother Attachment is now ready to use.
2
Remove the Milk tank lid. Insert the Milk
hose connector in the Milk inlet hole.
Firmly insert the Milk hose in the Milk hose
connector. Immerse the Milk hose into the
Milk tank.
4
On the Espresso Machine, press the Steam
wand release button to remove the Steam
wand.
Align Steam port to the machine, press
together until you hear a click. Direct the
Milk dispenser tube towards the cup.
15
Publicité
