Publicité
Les langues disponibles
Les langues disponibles
No. 2: a round hook bent 540°, to prevent unintended release (Fig. C).
Note: the eye of the eyelets (2) must be attached at right
angles to the direction of the swing, so that the attachment
on the swing is not too severely damaged by use.
Setting the height of the swing
The height of the seat can be adjusted at the ring at the top of the swing.
Once you have set the length of the cable, it will tighten again under
load (Fig. D).
Adjust the length of both cables so the swing is perfectly balanced.
Use
Fasten the safety belt (1b) so that you can safely push the child in the
swing. Proceed as follows:
1. Sit the child in the swing (1) with their legs facing forward.
Note: the child's legs must be inserted between the bottom bar and the
bottom of the swing.
2. Thread the end (1a) of the belt through the buckle (1c) below the
swing as shown in Fig. E, and close it.
Note: pull the belt taut but not too tight, so that the child is secured but
not cramped by it.
Storage
• When not in use, always store the product clean and dry at room
temperature.
• Please be aware that wood can change due to alterations in
temperature, humidity and other influences.
• The wood used in the product is a natural product and therefore there
may be slight deviations in colour and structure.
36
GB
Publicité
