Publicité
Les langues disponibles
Les langues disponibles
Dangers due to wear and tear!
• The plastic connectors on the ends of the cables must not be loosened,
as these ensure the safe suspension of the product.
• The cables and rings must be inspected by an adult before each use,
to prevent injuries caused by defective parts. As soon as the swing's
attachment show any defects, you must stop using the swing.
• The seat, chains, cables and other accessories must be inspected for
wear before each use.
• Regularly check the ceiling and frame to which the product is attached.
• Check the product for damage or wear before each use. Only use the
product if it is in perfect condition!
Mounting the swing
Before using the product for the first time, grease the metal
suspension rings of the lattice swing and the suspension
hooks you have additionally supplied – all of which are
exposed to constant friction – with commercially available,
waterproof machine grease.
Note:
Only mount the swing on fixtures where you can guarantee sufficient
stability with absolute certainty. For mounting, use at least 10mm sturdy
screw hooks that are bent at least 540° or completely closed to prevent
unintended release.
When mounting on wooden beams, the attachment must pass all the way
through the wood and be secured with a nut from above, to ensure a
sufficiently secure connection.
Various mounting hooks
Only attach the swing to a suitable mount.
These are:
No. 1: a closed eyelet, attached to the swing component with a
carabiner (Fig. B).
GB
35
Publicité
