Publicité
Les langues disponibles
Les langues disponibles
English – 12
Inserting the PowerMore Battery
(11)
(10)
(11)
(1)
(7)
(8)
To insert the battery (1), place its guide
grooves (12) onto the guide rails (11). Ensure that
the battery is aligned correctly and that the battery is
positioned in both guide rails. Slide the battery (1)
into the holder (9) until it audibly clicks into place.
Insert the cable connector (4) into the connection
socket (3). Ensure that the cable connector (4) is
aligned correctly.
Insert the cable connector (7) into the eBike charging
socket (8). Ensure that the cable connector (7) is
aligned correctly.
Secure the cable (6) in place as directed by the eBike
manufacturer (e.g. with cable clips).
0 275 U07 3RE | (07.03.2024)
(3)
(4)
(6)
Removing the PowerMore Battery
(6)
(13) (4)
Firstly, disconnect the cable (6) by opening the cable
lock as directed by the eBike manufacturer.
Pull the release mechanism (14) towards you ❶ and
remove the cable connector (7) from the eBike charg-
ing socket ❷.
Press the release buttons (13) and remove the cable
connector (4) from the connection socket.
To remove the battery (1), press the release but-
ton (10) and pull the battery (1) sideways out of the
holder (9).
Note: As a result of varying designs, the PowerMore
battery may need to be inserted and removed using a
different method. Read the eBike manufacturer's op-
erating instructions.
(14)
(7)
2
1
(14)
(9)
(10)
(1)
Bosch eBike Systems
Publicité
