Menu Operation
■ CI Information (In DTV mode)
This function enables you to watch some encrypted services (pay services).
Please insert CI card into the PCMCIA slot according to the arrow on the CI card.
NOTE:
The function can only be gotten when CI slot is available.
It is possible for you to change CI (Common Interface) menu screen and service
by consulting your dealer.
Please do not insert or pull out the CI card when power on.
Do not insert or pull out the CI card frequently so as to avoid any damages of the
TV and the CI card.
During initialization of the CI card, please don't operate the TV.
■ Signal Information(Only available when there is signal under DTV)
Press the▲/▼buttons to select the Signal Information, then press the ENTER
button to see the detail information.
■ Picture Mode: You can select the type of picture which best corresponds to your
viewing requirements. Contrast, Brightness, Color, Sharpness, and Tint (NTSC)
can be adjusted when the picture mode is set to User.
– Contrast: Adjust the white level of the picture.
– Brightness: Adjust darkness of black sections in the picture.
– Color: Adjust the color intensity of the picture.
– Sharpness: Object edges are enhanced for picture detail.
– Tint: Adjust the hue of the picture. (Valid only for NTSC signals).
■ Color Temperature: Select the color temperature that you feel comfortable.
■ Aspect Ratio: You can select the picture size which best corresponds to your
viewing requirements.
■ Screen (Valid only in the VGA channel)
– Auto Adjust: To adjust the all PC setting automatically.
– Horizontal Position: To adjust the horizontal placing of the image.
– Vertical Position: To adjust the vertical placing of the image.
– Size: To adjust the screen size.
– Phase: To adjust the internal signal phase.
■ NR: Reduces screen noise without compromising video quality.
Picture Menu
PICTURE
Picture Mode
Color Temperature
Aspect Ratio
Screen
NR
Dynamic Contrast
OverScan
Picture Reset
Move
Select
20
Home
Standard
16:9
Middle
Off
Normal
Return