Zephyr Ombra ZOM-E30BS Guide D'utilisation, D'entretien Et D'installation page 26

Troubleshooting
Possible Problem
The hood is not venting
out properly.
Mesh filter is vibrating.
26
Possible Cause
Using the wrong size of ducting.
The hood might be hanging to high
from the cook top.
The wind from the opened windows
or opened doors in the surrounding
area are affecting the ventilation of
the hood.
Blockage in the duct opening or
ductwork.
Filter is loose.
Spring clip is broken on the filter.
Change the ducting to the correct size.
Adjust the distance between the cook top
and the bottom of the hood within 26" and
34" range.
Close all the windows and doors to eliminate
the outside wind flow.
Remove all the blocking from the duct work
or duct opening.
Make sure the metal clips in the handle are
not stuck or replace the mesh filter.
Uninstall and re-install filter. Push up on
filter latch. Replace filter if needed.
Milano Use, Care, and Installation Guide
C O R E
M I L A N O
WA L L
Solutions