BorMann PRO BDH1710 Mode D'emploi page 4

EN
g) Always use the power tool, accessories and tool bits etc. in accordance with the instructions of this instruction manual, taking into account the working
conditions and the work to be performed. Use of the power tool for applications different from those intended could result in a hazardous situation.
Service
a) Have your power tool serviced by a qualified repair technician using only identical replacement parts. This will ensure that the safety of the power tool
is maintained.
Machine-Specific Safety Warnings
• Wear ear protection. The impact of noise can cause damage to hearing.
• Unplug your tool from the mains when you are not using it ,when changing tools or for maintenance.
• Store the tool in a dry place, far from sources of heat and dangerous vapours. Do not operate your tool near explosive or inflammable materials.
• The tool should always be used with its additional handle and must be firmly held with both hands.
• For tools equipped with an lubrication system: Before each use, check the oil level, the tightening of screws, the correct mounting of the drive spindle.
• Always check the surface for hidden cables or pipe lines. Use an appropriate detector in order to detect any live or metallic parts before using the tool
(for example, locate a live wire in a wall by using a metal detector).
• Do not try to disassemble or dismantle the tool by yourself.
• Only a competent and specialized service technician is allowed to repair or disassemble the tool, by using the genuine spare parts and the
manufacturer's instructions.
Intended Use
This machine is designed for heavy duty demolition and chiselling work using the appropriate chisel.
The equipment is to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse. The user / operator and not the manufacturer
will be liable for any damage or injuries of any kind caused as a result of this.
Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is
used in commercial, trade or industrial businesses or for equivalent purposes.
Functional Description and Specifications
The following numbering refers to the illustration of the machine indicated on page 2.
1
ON/OFF Switch
2 Tool Chuck
3
Bolt-on Handle
4 Inspection window / Oil filler opening
5
Additional handle
6 Main Handle
Technical Data
Model
Voltage/Frequency
Rated Input
Weight
Includes
The electric motor has been designed for a specific voltage only. Always check that the power supply corresponds to the voltage written on the
rating plate.
4
BDH1710
230 v/ 50 Hz
1700W
14 kg
Auxiliary Handle, 1 pcs 30 x 410 mm Pointed
Chisel, 1 pcs 30 x 410 mm Flat Chisel, 1 pair
of Carbon Brushes, 1 Grease Pot, Metal Case
WWW.NIKOLAOUTOOLS.COM
* The accessories illustrated or described
are not included as standard delivery.
The manufacturer reserves the right to make minor changes to product design
*
and technical specifi ca ons without prior no ce unless these changes signifi
cantly aff ect the performance and safety of the products. The parts described /
illustrated in the pages of the manual that you hold in your hands may also concern
other models of the manufacturer's product line with similar features and may not
be included in the product you just acquired.
To ensure the safety and reliability of the product and the warranty validity, all
*
repair, inspec on, repair or replacement work, including maintenance and special
adjustments, must only be carried out by technicians of the authorized service
department of the manufacturer.
Always use the product with the supplied equipment. Opera on of the
*
product with non-provided equipment may cause malfunc ons or even serious
injury or death. The manufacturer and the importer shall not be liable for
injuries and damages resul ng from the use of non-conforming equipment.