Publicité
Les langues disponibles
Les langues disponibles
23
hole first.
Filling water
●
Before you fill the drinking water into
the water tank, ensure that the water
tank is steady and in a correct position.
Caution!
Fill with water up to 3L(which is
suggested), and not above the level.
Otherwise, it may overflow when the
lid is close.
1.We recommend that you fill the
water by the following way.
2.Open the small lid by rotating it,
and fill water from the inlet of the
large lid. Please remember rotate
the small lid back to it's original
position when finish filling water.
Warning!
Don't touch other parts of the
appliance when filling water, it may
cause the water leakage.
Dispensing water
1.Make sure the cover of the water
tank is fitted on.
2.Close the fridge door and check
the dispenser.
Receiving Water
You should use the correct cup to
receive water underneath the water
dispenser.
Warning!
Don't push the dispenser lever
forward without cup, it may cause
the water leak from the dispenser.
Cleaning
●
1.Put the water tank out of the door
carefully, and then wash the tank, lid
and head lightly in water.
2.
After you have successfully
cleaned the appliance, you should
dry it by natural drying or using the
dryer.
3.If you have used the water
dispenser for many times, the water
in the receiving tank may drop on the
floor, which may make your floor
wet, and you should clean the tank
with dry towel regularly before
overflow.
Publicité
