Publicité
Les langues disponibles
Les langues disponibles
6.
Do not apply the device for conveying the air containing viscous compounds that would deposit on the
surface of the device elements,
7.
Do not apply the device for conveying the air containing aggressive compounds that would have destructive
effect on the device elements,
2.5 Technical datasheet
2.5.1. Sliding damper composition
The pneumatic sliding dampers are equipped with one cylinder up to Ø160 but it is designed to fit two cylinders
on request when needed. The sliding dampers as of Ø180 and up are equipped with two cylinders as a
standard.
An electro-pneumatic solenoid valve is included on every model.
The Cover house is optional to protect the user from the moving parts.
Position detectors are optional as well to indicate the position of the cylinder (and sliding damper blade).
Picture
5
User manual | AADA ABDA, CADB &CBDB pneumatic slidng damper
www.formula-air. com
Part
Body – ready for – AADS
Solenoid valve with connectors
Solenoid valve with T connectors
Pneumatic cylinder (round or square)
Cylinder holder (square cylinders)
Bolt M4 x 25
Bolt M8 x 40
Bolt M12 x 60
Flat washer for M4
Flat washer for M8
Flat washer for M12
Hexagon nut M10
Hexagon nut M12
Lock nut M8
Lock nut M12
Plastic spacer
Air hose
Cover house (Optional)
Position sensor (Optional)
Position
sensor
strap
for
cylinder (Optional)
Quantity
1
1 (from Ø80 up to Ø160)
1 (from Ø180 up to Ø500)
1 (up to Ø160)
or
2 (from Ø180 up to Ø500)
1 (from Ø80 up to Ø160)
Or
2 (from Ø180 up to Ø500)
2
1 (up to Ø160)
2 (from Ø180 up to Ø250)
2 (from Ø275 up to Ø500)
2
1 (up to Ø160)
2 (from Ø180 up to Ø250)
2 (from Ø275 up to Ø500)
1 (up to Ø160)
2 (from Ø180 up to Ø250)
2 (from Ø275 up to Ø500)
1 (up to Ø160)
2 (from Ø180 up to Ø250)
2 (from Ø275 up to Ø500)
1 (up to Ø160)
2 (from Ø180 up to Ø500)
Variable depending on damper
size
1
Normally 2 per cylinder
round
2 (up to Ø160)
4 (from Ø180 up to Ø500)
Publicité
