OPERATION
1. Touch the FastFreeze key.
The indicator light will come on and '2' appears in the display; the FastFreeze function is
▷
activated.
2. Touch the FastFreeze key again to disable the function.
The indicator light goes off; the FastFreeze function is deactivated. The set temperature
▷
is once again shown in the display.
Adjusting the temperature of the appliance while the intensive freezing function is
activated will immediately disable the intensive freezing function.
When the intensive freezing function is not manually disabled, the function will be
automatically disabled after about two days. The temperature then returns to the latest
set temperature.
Do not switch on the intensive freezing function unnecessarily. This will save energy.
Open door alarm
An alarm signal sounds when the appliance door is open for too long. The indicator light flashes
in the display.
Stopping the alarm
1. Close the door.
2. Touch the alarm key to stop the alarm.
▷ The alarm will stop sounding.
When the door is still open after 10 minutes, the appliance will switch to safe mode.
The LED lighting goes off.
EN 18