Publicité
Les langues disponibles
Les langues disponibles
TURNING THE CAMERA ON AND OFF
1. Press the Power/Mode button (4) to turn the camera on. The camera will make a
beep sound to confirm that it is ready for use.
2. Press and hold the Power/Mode button (4) for a few seconds again to turn it off.
Note: The camera will auto power off after 60 seconds of inactivity.
TAKING PHOTOS
Single shooting
You are already in "Single shooting" mode when you switch on the camera. Press
the Shutter button (3) to take a photo. The camera will beep to confirm that a picture
is taken. The number of pictures that you can take in memory is shown on the LCD
screen.
Continuous shooting
1. When you are in "Single shooting" mode, press the Power/Mode button (4) once
to get in "Continuous shooting" mode.
2. The "Continuous shooting" mode will be displayed in the upper-right corner of
the screen. Press the Shutter button (3) within the next 3 seconds to take 3 pictures
continuously.
Note: When the camera's built-in memory is full, you will not be able to take any
pictures.
PLAYBACK MODE
1. Switch on the unit then press the Playback mode (5) button.
2. Use the Up (6) and the Down (7) buttons to display the next or the previous photo.
3. To exit the playback mode, press the Playback mode (5) at any time.
Note: If there are no pictures stored in the camera's built-in memory, the playback
mode is not available.
Deleting one file in playback mode
In playback mode, use the Up (6) and the Down (7) buttons to display the desired
photo then the Shutter button (3) twice to delete it.
13
Publicité
