Zoofari 329691 1907 Notice De Montage page 8

Congratulations!
You have chosen to purchase a high-quality
product. Familiarise yourself with the product
before using it for the first time.
Read the following assembly
instructions and the safety infor-
mation carefully.
Use the product only as described and only
for the given areas of application. Store these
assembly instructions carefully. When passing
the product on to third parties, please also hand
over all accompanying documents.
Package contents/parts list
(Fig. A)
1 x baseplate (1)
1 x lying surface with drill hole (2)
1 x lying surface (3)
1 x lying surface with wall mount (4)
1 x cat bed (5)
1 x ladder, disassembled (6–8)
1 x cave, disassembled (9–12)
3 x column, large (13)
3 x column, small (14)
1 x column with thread (15)
2 x rod with toy (16)
5 x double-threaded bolt (A)
11 x screw, large (B)
2 x screw, small (C)
1 x hex key (D)
1 x assembly instructions
Technical data
Total dimensions (without cat bed): approx.
139 x 84 x 42cm (H x W x D)
Maximum load: 6kg
6
Date of manufacture (month/year):
03/2020
Intended use
The product serves as an indoor scratching post
for cats. The product is for private use and is not
intended for commercial use.
8 GB/IE
Safety information
Important: read these assembly
instructions carefully and keep them in
a safe place!
Life-threatening hazard!
• Never leave children unattended with the
packaging materials. There is a risk of
suffocation.
• The product is not a toy or a climbing
apparatus for children! Ensure that persons,
especially children, do not pull themselves up
on the product or stand on it. The product can
tip over.
Risk of injury!
• Ensure the product is properly stabilised
before using it!
• Place the product on a level and solid surface.
Do not place it near stairs.
• Do not place hazardous items, such as
candles, on or near the product.
• The product may only be used for its intended
purpose.
• Do not exceed the maximum load capacity.
• Not a toy for children!
• Keep away from children!
• Only use under supervision.
• Supervise animals while playing.
• Replace the product when it shows signs of
wear.
• Check the product for damage or wear
before each use. Only use the product if it is in
perfect condition!
Assembly
1. Remove the packaging and place all the parts
of the product on the floor.
2. Assemble the product according to Fig. B–E.
Note: to reduce the danger of tipping over, the
product can be placed with its back against a
wall.
3. Fasten the product to your wall with the wall
mount (4).
Note: to assemble the product you need a
suitable drill (not included in the package
contents) and a screwdriver (not included in the
package contents).