AEG HK624000XB Notice D'utilisation page 66

Problem
comes on.
8.2 If you cannot find a solution...
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre. Give the data from the rating
plate. Give also three digit letter code for the
glass ceramic (it is in the corner of the glass
surface) and an error message that comes
9. TECHNICAL DATA
9.1 Rating plate
Model HK624000XB
Typ 60 HAD 54 AO
Ser.Nr. .................
AEG
9.2 Cooking zones specification
Cooking zone
Left front
Left rear
Right front
Right rear
For optimal cooking results use cookware no
larger than the diameter of the cooking zone.
10. ENERGY EFFICIENCY
10.1 Product Information*
Model identification
Type of hob
66 ENGLISH
Possible cause
The second phase of the power sup‐
ply is missing.
PNC 949 492 153 02
220 - 240 V 50 - 60 Hz
Made in: Romania
6.5 kW
Nominal Power (Max heat set‐
ting) [W]
2300
1200
1200
1800
Remedy
Check if the hob is correctly connected
to the electrical supply. Remove the
fuse, wait one minute, and insert the
fuse again.
on. Make sure, you operated the hob
correctly. If not the servicing by a service
technician or dealer will not be free of charge,
also during the warranty period. The
information about guarantee period and
Authorised Service Centres are in the
guarantee booklet.
Cooking zone diameter [mm]
210
145
145
180
HK624000XB
Built-In Hob