Publicité
Les langues disponibles
Les langues disponibles
•
These instructions supplement the instructions
that were included with the product. For other
procedures, please refer to the operating instructions
for the product.
•
Under no circumstances may the design of the
attachment be modified without the permission of
the manufacturer. Do not use an attachment that
appears to have been modified by others and
always use original accessories. Non-authorized
modifications and/or accessories can result in
serious personal injury or the death of the operator
or others.
Save all warnings and instructions for
future reference
Safety instructions for operation
•
If you encounter a situation where you are uncertain
how to proceed you should ask an expert. Contact
your dealer or your service workshop.
•
Avoid all usage which you consider to be beyond
your capability.
•
Cutting tool. Do not touch the tool without first
removing the battery.
•
Never allow children to use the product.
•
Ensure that no-one comes closer than 15 m while
you are working.
•
Never allow anyone else to use the product without
first ensuring that they have understood the contents
of the operator's manual.
•
Never work from a ladder, stool or any other raised
position that is not fully secured.
(Fig. 12)
•
Always ensure you have a safe and stable working
position.
•
Always use both hands to hold the product. Hold
the product at the side of your body and hold the
hand between the arrow sign and the end of shaft
coupling.
(Fig. 13)
•
Make sure that you connect the harness to the
support hook. Only use a single harness.
•
Use your right hand to control the power trigger .
(Fig. 14)
•
If an emergency occurs, let go of the product and let
it fall to the ground.
•
Make sure that your hands and feet do not come
near the cutting attachment when the motor is
running.
•
When the motor is switched off, keep your hands
and feet away from the cutting attachment until it has
stopped completely.
•
Watch out for stumps of branches that can be thrown
out during cutting.
•
Always lay the product on the ground when you are
not using it.
2206 - 005 - 28.06.2024
•
Do not cut too close to the ground. Stones and other
objects can be thrown out.
•
Check the working area for foreign objects such as
electricity cables, insects and animals, etc, or other
objects that could damage the cutting attachment,
such as metal items.
•
If any foreign object is hit or if vibrations occur, stop
the product immediately. Remove the battery and
make sure that the product is not damaged. Repair
any damage.
•
If anything jams in the blades while you are working,
stop the product immediately.Remove the battery
and make sure the product has stopped completely
before cleaning the blades.
Personal protective equipment
WARNING:
instructions that follow before you use the
product.
•
Long-term exposure to noise can result in permanent
hearing impairment. Always use approved hearing
protection.
•
Always wear protective, non-slip boots.
(Fig. 15)
•
Always wear working clothes and heavy-duty long
trousers.
•
Never wear loose clothing or jewellery.
•
Make sure your hair does not hang below shoulder
level.
Harness quick release
WARNING:
the harness quick release (A) is damaged.
Make sure that the harness quick release
operates correctly after you adjust the
product and the harness.
The harness quick release (A) is at the front of the
product. The harness straps must always stay at the
correct position. In an emergency, the harness quick
release helps you to safely release from the product.
(Fig. 16)
Safety devices on the product
WARNING:
instructions that follow before you use the
product.
In this section the product's safety features, its purpose
and how checks and maintenance should be carried
out to ensure that it operates correctly. See instructions
Introduction on page 5 to find where
under the heading
these parts are located on your product.
Read the warning
Do not use the harness if
Read the warning
7
Publicité
