Publicité
Les langues disponibles
Les langues disponibles
Working table
Troubleshooting
Problem
"ADD WATER" indicator
lights up
"ICE FULL" indicator
lights up
Ice is lumped together.
Possible causes
1. Low water level or lack of water
2. The water screen (filter) at the
bottom of water tank is blocked.
3. Pump malfunction.
1. Ice basket is full and the infrared
light is blocked by the ice.
2. Infrared light-emitting diode &
light-receiving diode do not work.
Making ice takes too much time.
The water in the water tank is of too
low temperature.
Drain plug
36
Solution
1. Stop making ice, refill water
and then press the
"ON/OFF" key to restart the
ice-making cycle.
2. Clean the appliance.
3. Send the appliance to the
authorized department for
repair.
1. Remove the ice from the
ice basket.
2a. Wipe any foreign objects
from the infrared light-
emitting diode & light-
receiving diode and restart
the ice maker.
2b. Call Customer Service, if
the infrared light-emitting
diode & light-receiving
diode still do not work after
wiping up the foreign
objects from them and
restarting the ice maker.
Stop making ice and restart the
ice-making cycle after the ice
melts.
Fill the water tank with water
with a temperature between
8 °C and 25 °C.
Publicité
