Gorenje IMD1200SB Notice D'utilisation page 34

Control panel
Using the appliance
1. Ensure that the drain plug at the bottom of the water reservoir is properly closed.
2. Plug the ice maker into the wall socket; the
idle for 30 minutes before plugging it in if it has been moved.
3. Open the top lid and remove the ice basket.
4. Fill the water reservoir with drinking water. NOTE: Do not fill above the MAX water level mark.
5. Replace the ice basket and close the top lid.
6. Press the
ice size. If the appliance requires cleaning, press the
mode.
Key
key; the indicator will stay lit. At that time, press the
Function
Start or stop the appliance.
In standby mode: indicator blinks
In operation: indicator stays on continuously.
Indicator lights up when the ice basket is full.
Indicator lights up when the water reservoir is
lacking water.
Indicator lights up when small ice is selected.
Indicator lights up when large ice is selected.
Indicator lights up when the appliance is cleaned.
To select small/large ice or clean function.
indicator will blink. NOTE: Please leave the ice maker
key to select the
34
key to select the
function in standby