Publicité
Les langues disponibles
Les langues disponibles
OPERATING AND MAINTENANCE MANUAL
CENTRIFUGAL ELECTRIC PUMP CB SERIES
4.
Reasonably foreseeable misuse
• It is strictly forbidden to use the equipment for uses other than those described in the
"Intended use" section and for pumping liquids that:
• contain abrasive substances
• contain solids or fibrous substances
• are flammable or explosive (group I liquids)
• are chemically aggressive, toxic and harmful (only available if special equipment is
supplied).
It is strictly forbidden to use the equipment:
• in a configuration other than the one intended by the manufacturer.
• in a zone classified according to the 2014/34/EU ATEX directive.
• if it is integrated into other systems and / or equipment not considered by the
Manufacturer in the final design.
• if it is connected to energy sources other than those intended by the manufacturer
(indicated on the data plate).
• dry or without a continuous flow of water.
• with the delivery outlet closed for more than 2 / 3 minutes, as this would cause the
pumped liquid to overheat and consequently damage the electric pump or some of its
components.
• in combination with commercial devices for a purpose different to the one intended
by the manufacturer.
5.
Transport
The machines referred to will be supplied in suitable packaging to ensure that they are
adequately protected during transport. If the packaging appears to be damaged upon
receipt of the goods, make sure that the equipment has not been damaged during
transport and that nothing has been tampered with. If the equipment appears to be
damaged or if any parts are missing, the carrier and the manufacturer must be notified
immediately, and photographic documentation provided. The materials used to protect
the equipment during transport must be disposed of according to the procedures used
in the country of use.
6.
Lifting and Handing
When carrying out lifting and handling operations, the operator must wear at least the
minimum personal protective equipment required for the work to be carried out (safety
shoes, gloves and hard hat). Machines weighing more than 25 kg must be moved
using suitable handling systems, the capacity of which is greater than the weight of
the machine to be handled. (See the weight indicated on the packaging). If slings are
needed to move the machine, they must be in good condition and their capacity must
be adequate for the weight of the machine to be handled. (See Fig. 7). Electric pumps
weighting <25 kg can be lifted manually by the operator without having to use lifting
equipment.
www.proindecsa.com / proindecsa@proindecsa.com
11
Publicité
