Publicité
Les langues disponibles
Les langues disponibles
FUNCTION BUTTONS:
MODE: Press to select functions.
SET: Press to set values of time, distance, calories, or pulse
when not in SCAN mode.
RESET: Press to reset time, distance and calories to zero
when not in SCAN mode.
Press and hold for a few seconds to reset all values.
AUTO ON/OFF
To turn on the meter, start pedaling or press any key.
After approximately 4 minutes of inactivity, the monitor will turn off.
This meter can (1) count the value from this workout (2) countdown from a value you set.
OPERATION PROCEDURES:
SCAN: Press MODE until pointer points to SCAN. Display will rotate through all 6 functions: Time,
Speed, Distance, Calorie, ODO and Pulse. Pointer will point to the function being displayed.
Each function will display for 4 seconds. If you want to view a specific function, press MODE
a
until pointer points to function you want.
TIME: Displays time of your exercise session.
SPEED: Displays current speed.
DISTANCE: Displays distance you have pedaled.
CALORIES: Displays the approximate number of calories burned.
ODOMETER: Displays the total accumulated distance. Pressing RESET does not reset the odometer.
Taking out the batteries resets the odometer.
b
PULSE: Press MODE until pointer points to PULSE. Before measuring your pulse rate, place the
palms of your hands on both contact pads and the monitor will show your current heart beat rate in
beats per minute (BPM) on the LCD after 6~7 seconds.
During the process of pulse measurement, the measurement value may be higher than the virtual
pulse rate during the first 2~3 seconds, then will return to normal level. The measurement value
cannot be regarded as the basis of medical treatment.
COUNTDOWN FUNCTION:
The meter has a countdown function for TIME, DISTANCE, and CALORIES. To use the countdown
c
function, press MODE to select TIME, DISTANCE or CALORIES. Press SET to set the value. You can
start pedaling. The meter will countdown from the value you set. When the countdown is done, it will
automatically start counting from 0.
COMPUTER INSTRUCTIONS
13
t
Publicité
