GreenWorks 2600602 Guide D'utilisation page 11

OPERATinG inSTRUCTiOnS
TO INsTALL BATTERY PAcK (See Figure 4)
• Slide the battery (1) down to lock it into position. The battery is fully inserted into the snow
shovel when you hear an audible "click".
2
1
Fig. 4
TO REMOVE BATTERY PAcK (See Figure 4)
• Release the trigger switch. The lock-out button will pop out, and the snow shovel will stop.
• Press and hold the battery latch button (2) at the rear handle.
• Remove battery pack from the snow shovel.
11