Publicité
Les langues disponibles
Les langues disponibles
CHECKING BATTERY CAPACITY
that maximum run time can be achieved. This lithium-ion battery will not develop a memory and may be
charged at any time. A fully discharged battery pack will require approximately 30 minutes to fully charge
from a discharged state.
Press the battery capacity indicator (BCI) button. The lights will illuminate according to the
batteries current power level. See chart below:
BATTERY CAPACITY
INDICATOR (BCI) BUTTON
BATTERY PACK
• Store the battery pack fully charged.
• Once the charging light turns green, remove the battery from the charger.
• Do not store the battery pack on the tool.
• After charging, the battery pack may be stored in the charger, as long as the charger is not
plugged in.
CHARGER MAINTENANCE
• Keep the charger clean and clear of debris. Do not allow foreign material to get into the
recessed cavity or onto the contacts. Wipe the charger clean with a dry cloth. Do not use
solvents or water, and do not place the charger in wet conditions.
• Unplug the charger when there is no battery pack in it.
• Fully charge the batteries before placing them in storage.
• Store the charger at normal room temperature. Do not store it in excessive heat. Do not use
the charger in direct sunlight. Recharge at room temperature between 45˚F and 100˚F (7˚C
and 38˚C). If the battery pack is hot, allow it to cool down before recharging.
Lights
3 Green Lights
2 Green Lights
1 Green Light
Lights go out
Capacity
The battery is more than 75% capacity
The battery is between 35% and 75% capacity
The battery is less than 35% capacity
The battery requires charging immediately
16
LIGHT METER
Publicité
