Gewa UP405 Guide Rapide page 27

Diagram A
A1
A2
C1 LINE IN
C2 LINE OUT L/R
C3 MIDI IN/OUT
C4 USB-B Connection
C5 Power Supply
4.4
A1 USB IN/OUT
A2 Headphone sockets
C1 C3
BLUETOOTH AUDIO + MIDI
Establish a Bluetooth connection to your GEWA digital piano. Your GEWA digital piano
has Bluetooth MIDI and audio functionality. To establish an audio connection with your
smartphone or tablet, you will need to put the instrument into „pairing mode". To do
this, click on the gearwheel icon in the lower right corner of the touch display. Click on
„Settings" and then press the upper right arrow until the display shows „Bluetooth 1". Now
press „Connect" to put the instrument into pairing mode. Search for „GEWA Digital Piano"
on your mobile device and connect by using pin 4392. To establish a Bluetooth MIDI
connection, open the corresponding MIDI application on your mobile device and search
for Bluetooth devices. You do not need to put the GEWA digital piano into „pairing mode".
For more information, please refer to the user manual.
Connect a USB stick or another USB device here.
Connect one or two sets of headphones here..
C4
C2
This port is for external sound source playback (e.g. MP3
players) through the speaker system via a 3.5mm jack
socket.
This connection is split into the stereo channels L(eft) and
R(ight). Using 6.3mm jack cables, you can connect these
outputs to a receiver, e.g. an amplifier or a recorder .
Connect MIDI devices here..
Connect your digital piano with your PC via this connection.
Connect your digital piano to the power supply here, using
the power cable.
FIRST STEPS
UP405
C5
27