Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE
Grease filters
Odour/fine particle filter HF3001
EN 8
Removing the grease filters
1. Remove the filters one by one by pulling on their release handles.
• More noise is produced when odour/fine particle filters are used
than when the cooker hood is used with an exhaust vent.
• Odour/fine particle filters function optimally at a lower motor speed.
Consequently, you should avoid the intensive setting as much as
possible.
Replacing the odour/fine particle filter HF3001
The odour/fine particle filter must be replaced annually. To replace
the filter, follow the instructions supplied with the new filter. The
recirculation set HR0013 must be ordered for the first installation.
Important:
• The saturation of the filter depends on the intensity of use, the
manner of cooking and the regularity with which the grease filters
are cleaned.
2x
Publicité
