Publicité
Les langues disponibles
Les langues disponibles
Installation
Rotate the side adjusting nut according to the
position of the door (clockwise/counter-clockwise).
Tighten the fixing nut which is at the top in order to
fix the position.
WARNING:
B
Product must not be plugged in when
adjusting the feet. There is the risk of
electric shock!
4.6 Illumination lamp
Do not attempt to repair yourself but call the
Authorized Service Agent if the LED illumination
lamps do not go on.
The lamp(s) used in this appliance is not suitable
for household room illumination. The intended
purpose of this lamp is to assist the user to place
foodstuffs in the refrigerator/freezer in a safe and
comfortable way.
4.7 Door/Drawer Open Warning
An audio warning signal will be given when the
door of your product is left open for 1 minute. This
warning will be muted when the door is closed or if
any of the display buttons are pressed.
adjusting nut
fixing nut
fixing nut
adjusting nut
First unplug the product.
4.8 Water connection
First you must connect the water hose to the
refrigerator.
WARNING:
A
any, must be unplugged during connection.
4.9 Connecting the water
hose to the refrigerator
3. Remove the valve channel cover (A) from the water
inlet valve.
4. Connect the water line (C) to the inlet valve (B) and
tighten by hand to secure it. It is not necessary to use
pliers, but if there is a leak, you may tighten slightly
with a pair of pliers.
15 / 31 EN
Display
Refrigerator and the pump, if
Refrigerator / User Manual
Publicité
