LG WM4000HA Serie Manuel Du Propriétaire page 30

30 OPERATION
NOTE
• Be careful when opening the door as wet
laundry may drip or fall out.
TM
Turbo Wash
Adding this option reduces the cycle time while still
providing similar wash performance to the same
cycle without Turbo Wash
Cold Wash
Press the Cold Wash button to save energy by
using cooler water. It will increase the wash and
rinse times to maintain wash performance.
• Wash time will increase up to several minutes
with this option.
• For best wash results, only wash small loads (less
than 8 lb) with this option.
Extra Rinse
This option adds an extra rinse to the selected
cycle. Use this option to help ensure the removal
of detergent or bleach residue from fabrics.
• Press the Extra Rinse button to add additional
rinses to the cycle.
Rinse+Spin
Select this option to rinse and spin a load
separately from a regular cycle. This can be helpful
in preventing fresh stains from setting in fabrics.
1
Press the Power button to turn on the
washer.
• Do not select a cycle.
2
Press the Rinse+Spin button.
• You can change the spin speed by pressing
the Spin button.
3
Press the Start/Pause button.
Control Lock
Use this function to disable the controls. This
function can prevent children from changing
cycles or operating this washer.
TM
.
NOTE
• The function does not lock the door.
• Once this function is set, all buttons are locked
except the Power button.
• When the controls are locked,
remaining time are alternately shown on the
display during the wash cycle.
• Turning off the power will not reset this function.
You must deactivate this function before you can
access any other options and functions.
Locking/Unlocking the Control Panel
1
Turn on the power.
2
Press and hold the Rinse+Spin button for 3
seconds to activate/deactivate this function.
• When the function is deactivated, a chime will
sound and the remaining time for the current
cycle will reappear on the display.
Signal
The washer plays a melody when the wash cycle is
finished. The buttons make a sound each time a
button is pressed. Use this button to turn the
melody and button tones on or off.
• To turn the function on/off, press the Signal button.
Spin Only
Use this option to spin clothes and drain the water
from the tub.
• Use this option to drain water if the wash cycle is
interrupted by a power failure or to spin dry
hand-washed items.
1
Press the Power button to turn on the washer.
• Do not select a cycle.
2
Press and hold the Spin button for 3 seconds.
• You can change the spin speed by pressing
the Spin button.
3
Press the Start/Pause button to begin.
and the
CL