Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
A. SECURITY INFORMATION
Please read carefully the instruction, which includes important information about the
installation, usage and maintenance; Keep this user guide for future consultation
This product is for professional use only! Flashing lights is known to trigger epileptic seizures to people
who are photosensitive.
Unpack and check carefully that there is no transportation damage before using the unit
-
Do not stare directly into the light. Never look at an exposed lamp while it is lit.
-
Always unplug the device before lamp or fuse replacement.
-
Do not remove the rear cover : there are no user-serviceable part inside.
-
Do not expose the fixture to rain or moisture
-
Never operate the fixture with the front glass open, missing or damaged
-
Replace the lamp when it becomes defective or worn out (follow the instructions detailed in
-
section D « REPLACE THE LAMP OR FUSE »)
When replacing the lamp, allow the fixture to cool for at least 15 minutes before opening the
-
fixture or removing the lamp
Always ground (earth) the fixture electrically
-
Keep all combustible/flammable materials and liquids at least 0.50m away from the fixture.
-
Minimum distance to illuminated surface : 10M
-
Be sure to locate the unit in a place with adequate ventilation. Be sure that no ventilation slots are
-
blocked.
Be careful that no liquids or other objects can enter into the unit. If this ever happens, disconnect
-
the main power immediately.
The exterior of the fixture can reach temperatures up to 120°C. Allow the fixture to cool down for
-
at least 15 minutes before handling
Do not operate the fixture if the ambient air temperature exceeds 40°C.
-
When suspending the fixture above ground level, verify the structure can hold at least 10 times
-
the weight of all installed devices.
Use approved means of secondary attachement such as safety cables..
-
Avoid extending periods of continuous flashing, particularly at frequencies of 10 to 20 flashes per
-
second.
B. TECHNICAL SPECIFICATIONS
Power : AC230V, 50/60Hz
-
Current consumption : 8A
-
Lamp : Strobe XENON PX-3000
-
Fuse : 32 amp
-
Dimensions : 472 x 152 x 255 mm
-
Weight : 6.7kg
-
Publicité
Table des Matières
