Waeco AirConServiceCenter VAS 6746B Notice D'utilisation page 91

VAS 6746B
5. Enter the administrator code "0000" (default setting) and press
ENTER to confirm:
I
NOTE
For security reasons, a new administrator code must be selected each
time, but not "0000" as this will deactivate the entire function.
Users can be created using the administrator code.
6. Enter the new administrator code:
7. Confirm the new administrator code:
8. Use the cursor keys  or  to select the user:
9. Create the four-digit personal user code (once a code is created
here, the device can then only be operated using this code).
10. Confirm the new user code:
I
NOTE
Use the yellow information key to switch between upper and lower case.
EN
I n s e r t A D M c o d e
- - - -
A D M a r e a
I n s e r t n e w c o d e
- - - -
A D M a r e a
C o n f i r m n e w c o d e
- - - -
A D M a r e a
U s e r n u m b e r
A D M a r e a
U s e r n u m b e r
I n s e r t n e w c o d e
- - - -
A D M a r e a
U s e r n u m b e r
C o n f i r m n e w c o d e
- - - -
1
1
Operation
91