Waeco AirConServiceCenter VAS 6746B Notice D'utilisation page 106

Operation
12. Connect the components for flushing to the service ports (13)
and (14) of the AirConServiceCenter using special adapters and in
accordance with the manufacturer's specifications to form a flushing
circuit.
13. In the basic menu, use the cursor keys  or  to select
"Other selections":
14. Press ENTER to confirm.
15. Use the cursor keys  or  to select "Flushing":
16. If necessary, use the keypad (8) to enter the data and press ENTER
to confirm. If no data is to be entered, press ENTER to switch to the
next program step.
17. Use the cursor keys  or  to select whether to flush the entire air
conditioning system or just individual components:
18. Press ENTER to confirm.
19. Follow the instructions in the display.
✔ After flushing is completed, the basic menu for the
AirConServiceCenter appears.
20. If necessary, remove the adapter from the flushing circuit and
reconnect all the components to the refrigerant circuit.
Fit the connections of the AirConServiceCenter to the vehicle air
conditioning system and open them.
21. In the basic menu, use the cursor keys  or  to select
"Free selection":
22. Press ENTER to confirm.
106
S h o r t s e l e c t i o n
F r e e s e l e c t i o n
O t h e r s e l e c t i o n s
E N T E R - O K S T O P - E X I T ⬍
F l u s h i n g
R e s e t S c a l e s .
S e r v i c e .
E N T E R - O K S T O P - E X I T ⬍
F u l l f l u s h i n g
F a s t f l u s h i n g
E N T E R - O K S T O P - E X I T ⬍
S h o r t s e l e c t i o n
F r e e s e l e c t i o n
O t h e r s e l e c t i o n s
E N T E R - O K
VAS 6746B
□
□
■
■
□
□
■
□
□
■
□
⬍
EN