Software Installation; Control With The Pc Software - VOLTCRAFT DPPS-60-8 Mode D'emploi

12. SOFTWARE INSTALLATION

Software is compatible with Windows
1. Insert the supplied software CD into the DVD drive of your computer.
2. Located in directory USB CP210x Drivers... install the driver (USB to UART Bridge) suitable to
your operating system.
3. Copy the directory hcs from the CD to the computer's application directory or any location of your
choosing.
4. Open the file hcs.bat in the directory hcs. The progam starts up.

13. CONTROL WITH THE PC SOFTWARE

1. Set selection switch MODE (8) into position Normal.
2. Connect the power supply with the USB cable to a USB hub on your computer. Connect the USB
cable to the USB port (13) on the rear.
3. Turn the power supply on.
4. Start the program with the hcs.bat file. After start-up the power supply is controlled via the program.
5. The control indicator REAR CONTROL (2) lights up. The power supply no longer registers inputs
by the front control knobs.
60
operating systems XP, 2003, Vista, 7 ,8
®