Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
9. MEMORY SLOT OPERATION "PRESET" AND "SET"
Three fixed voltages, including current settings, can be stored in the device with the Set function and
directly selected through the Preset function.
Ex works, all three memory slots (P1, P2, P3) are preset.
They are assigned as follows:
Memory
Type
DPPS-16-30
DPPS-32-15
DPPS-60-8
DPPS-16-40
DPPS-32-20
DPPS-60-10
DPPS-16-60
DPPS-32-30
DPPS-60-15
Make sure that no consumers are connected.
The memory can also be set via the software provided, check the chapter "Control with the
PC software".
1. Activate the Preset function through the selection switch MODE (8) on the rear.
2. Put the switch in the Preset position. The front LED
indicator REAR CONTROL (2) lights up. The front
control knobs are now inactive.
3. Select the respective memory slot P1, P2 or P3 on
the rear selection switch RECALL (9). The respective
output voltage is indicated on the display (1).
4. Now you can connect and switch on the consumer.
P1
Voltage
Current
5 V
Maximum
5 V
Maximum
5 V
Maximum
5 V
Maximum
5 V
Maximum
5 V
Maximum
5 V
Maximum
5 V
Maximum
5 V
Maximum
P2
Voltage
Current
13.8 V
Maximum
13.8 V
Maximum
13.8 V
Maximum
13.8 V
Maximum
13.8 V
Maximum
13.8 V
Maximum
13.8 V
Maximum
13.8 V
Maximum
13.8 V
Maximum
P3
Voltage
Current
15 V
Maximum
25 V
Maximum
55 V
Maximum
15 V
Maximum
25 V
Maximum
55 V
Maximum
15 V
Maximum
25 V
Maximum
55 V
Maximum
2
3
53
Publicité
Chapitres
Table des Matières
Dépannage
