Publicité
Les langues disponibles
Les langues disponibles
The appliance complies with protection
class I. Connect the appliance
to 220–240 V/50 Hz alternating current
via a correctly installed socket with
protective conductor. The socket must
be protected by a 10 A to 16 A fuse.
For appliances operated in non-
European countries, check whether the
indicated voltage and current type match
the values of your electricity supply. This
information can be found on the rating
plate, Fig.
.
/
m
Warning
Never connect the appliance
to electronic energy saver plugs.
Our appliances can be used with mains
and sine-controlled inverters. Mains-
controlled inverters are used
for photovoltaic systems which
are connected directly to the national
grid. Sine-controlled inverters must be
used for isolated applications (e.g. on
ships or in mountain lodges) which are
not connected directly to the national
grid.
Getting to know your
appliance
Please fold out the illustrated last page.
These operating instructions refer
to several models.
The features of the models may vary.
The diagrams may differ.
Fig. !
* Not all models.
1–4
Controls
5
Light (LED)
6
Glass shelf
7
Condensation outlet
8
Vegetable container
9
Height-adjustable feet
10*
Butter and cheese compartment
11
Door shelf
12
Egg rack
13*
Door shelf "EasyLift"
14
Shelf for large bottles
Controls
Fig. "
1
On/Off button
Serves to switch the appliance on
and off.
2
Temperature display
The numbers correspond
to the set refrigerator
compartment temperatures in °C.
3
"super" display
Illuminates, if the super cooling is
in operation.
Temperature selection button
4
Press this button to set the
temperature.
en
25
Publicité
