en
Switching the
appliance on
Fig. "
Switch on the appliance with the On/Off
button 1.
The temperature display 2 indicates the
set temperature.
The appliance begins to cool. Light is
switched on when the door is open.
We recommend a factory setting
of +4 °C in the refrigerator compartment.
Do not store perishable food warmer
than +4 °C.
Operating tips
While the refrigeration unit is running,
■
water droplets or a thin layer of ice
may form at the rear panel of
the refrigerator. This is nothing
unusual. It is not necessary to scrape
off the frost or wipe off the water
droplets. The rear panel defrosts
automatically. The condensation
collects in the condensation channel
and is carried to the refrigeration unit
where it evaporates.
If the air humidity is high,
■
condensation may form
in the refrigerator compartment,
especially on the glass shelves. If this
is the case, pack or wrap the food
and select a lower temperature
in the refrigerator compartment.
26
Setting
the temperature
Fig. "
The temperature can be set
from +2 °C to +8 °C.
Keep pressing temperature setting
button 4 until the required refrigerator
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on the
temperature display 2.
Usable capacity
Information on the usable capacity can
be found inside your appliance on
the rating plate. Fig. /
Refrigerator
compartment
The refrigerator compartment is the ideal
storage location for meat, sausage, fish,
dairy products, eggs, ready meals
and pastries.
Storing food
Store fresh, undamaged food. The
■
quality and freshness will then
be retained for longer.
In the case of ready-made products
■
and bottled goods, observe the best-
before date or use-by date specified
by the manufacturer.