SOMFY Irismo Wirefree Notice page 7

EN
2.4.2. Re-setting the end limits
Readjusting the Open end limit (Fig 10)
1) Press the Open button to move the motorised product to the end limit to be readjusted. The LED is red.
2) Press the Open and Close buttons of the RTS remote control simultaneously until the motorised
product moves.
3) Press the Open or Close button to move the motorised product to the new desired position.
4) To confirm the new end limit, press the my button until the motorised product moves.
Readjusting the Close end limit (Fig 11)
1) Press the Close button to move the motorised product to the end limit to be readjusted. the LED is red
blink
2) Press the Open and Close buttons of the RTS remote control simultaneously until the motorised
product moves.
3) Press the Open or Close button to move the motorised product to the new desired position.
4) To confirm the new end limit, press the my button until the motorised product moves.
2.4.3. Erasing the control point from the memory of the motor (Fig 12)
This reset deletes all the local remote control, however the end limit settings and favourite position are
retained.
To delete all the programmed remote control, press and hold the motor LED button until the motorised
product moves twice.
All the remote control are deleted.
2.4.4. Erasing the memory of the motor (Fig 13)
This reset deletes all remote control, all the sensors and all the end limit settings, and resets the motor' s favourite
position (my).
To reset the motor, press and hold the LED button until the motorised product moves 3 times.
All the settings are erased.
3. USE AND MAINTENANCE
This drive is maintenance-free
3.1. OPEN AND CLOSE BUTTONS
(Fig 14)
Pressing the Open or Close button fully opens or closes the motorised product.
3.2. STOP FUNCTION
(Fig 15)
The motorised product is moving.
Briefly press my: the motorised product stops automatically.
3.3. FAVOURITE POSITION ( )
my
(Fig 16)
The motorised product is stopped.
Briefly press my: the motorised product starts to move, and stops in the favourite position (my).
To modify or delete the favourite (my) position, see the section entitled "Additional settings"
3.4. ADDITIONAL SETTINGS
3.4.1. Modifying the favourite position (my) (Fig 17)
1) Place the motorised product in the desired favourite position (my).
2) Press my for ≈ 5 seconds until the motorised product moves: the desired favourite position (my) has been
programmed.
7
Copyright © 2021 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.