Nederman 20376724 Manuel D'instructions page 8

GB
Installation overview
Install the receiver
at a suitable place
on wall.
Electrical control box containing con-
tactor, motor protector and transfor-
mer (not included in the delivery).
Installation of the transmitter
Connect the transmitter to the vehicle
ignition system, in a way that the trans-
mitter gets current when the ignition is
on or when the engine is started.
Power supply: 2/24 V DC. Mount the
transmitter in the driver's compart-
ment, e.g. on the dashboard.
8
Fan start/stop device
Installation of the antenna
Install the antenna in the middle of the room and as high as possible, in
order to get as good receiving as possible. To obtain maximum range
the antenna must be mounted in an unscreened position clear of other
antennas or metallic objects and away from any cables carrying high
current. Fit the antenna on the bracket according to the figure. Mount
the unit in the ceiling or on the wall and connect the antenna to the
receiver (see wiring diagram).
red conductor +
black conductor -
Nederman NCF-fan
Nederman exhaust
extraction system
MagnaTrack
with start/stop device.