REED SD-1128 Manuel D'instructions page 8

2) Plug the optional Type K or J Thermocouple Probe into the Type
K/J Probe Input Socket.
3) The screen will display a "K", meaning it is configured for a Type
K thermometer probe. The measured temperature will now be dis-
played on the display screen. To change the meter to accept a Type
J Probe, please see the Advanced Settings section.
Data Hold
While taking a measurement, press the Hold Button once and the mea-
sured value will hold on the screen, and a HOLD symbol will appear.
Press the Hold Button once again will release the data hold function.
Data Record (Max., Min. reading)
The data record function records the maximum and minimum readings.
Press the REC Button once to start the Data Record function and a "REC"
symbol will appear on the display. With the "REC" symbol on the display:
1) Press the REC Button once, and a "REC. MAX." symbol along with
the maximum value will appear on the display. To delete the maxi-
mum value, press the Hold Button once and the display will show
a "REC." symbol only and execute the memory function continu-
ously.
2) Press the REC Button again, and a "REC. MIN." symbol along
with the minimum value will appear on the display. To delete the
minimum value, press the Hold Button once, and the display will
show a "REC." symbol only and execute the memory function
continuously.
3) To exit the memory record function, press the REC button for 2
seconds. The display will revert to the current reading.
Backlight ON/OFF
After powering the meter ON, the LCD Backlight will turn on automati-
4 Blue
3 Yellow
cally. While taking measurements, press the Backlight Button and the LCD
Backlight will turn off. Press the Backlight Button once again to turn the
5 Red
3 Yellow
LCD Backlight back ON.
4 Blue
1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
reedinstruments
www
Rich Black - REED Instruments
20/20/20/100
8
com