REED SD-1128 Manuel D'instructions page 13

Select the Thermometer to Type K or Type J
1) When the lower display shows "tYPE", use the Up or Down Buttons
to select "K" (for Type K Thermometer) or "J" (for Type J Thermom-
eter).
2) After selecting "K" or "J", press the Enter Button to save the setting
as the default. To exit "Advanced Settings", press the Esc Button.
Select the Temperature unit to °C or °F
1) When the lower display shows "t-CF", use the Up or Down Buttons
to select "C" (for °C) or "F" (for °F).
2) After selecting "C" or "F", press the Enter Button to save the set-
ting as the default. To exit "Advanced Settings", press the Esc
Button.
Set sampling time
1) When the lower display shows "SP-t", use the Up or Down Buttons
to adjust the value to either 0, 1, 2, 5, 10, 30,60, 120, 300, 600,
1800, or 3600 seconds.
2) After the Sampling value is selected, press the press the Enter But-
ton to save the setting as the default. To exit "Advanced Settings",
press the Esc Button.
SD memory card Format
Please Note: Formatting the SD card erases all data from that SD card.
1) When the lower display shows "Sd F", use the Up or Down Buttons
to select "yES" (format the SD card) or "no" (do not format the SD
card).
2) To format your SD card, select "yES" and press the Enter Button.
The Display will show "yES Enter", to confirm. Press the Enter But-
ton to confirm.
4 Blue
3 Yellow
5 Red
3 Yellow
4 Blue
1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
reedinstruments
www
Rich Black - REED Instruments
20/20/20/100
13
com