Heitronic Akiaki Instructions D'installation Et D'utilisation page 4


When mounting the recessed floor spotlight and laying the cables, be aware of possible tripping hazards
in walking areas.

Switch on the circuit breaker of the house installation again.
. Malfunctions
Luminaire does not switch on

Light switched on at the switch?

Check the connected lines
. Technical data
Article Connection
35927
230 V AC, 50 Hz
These products contain a light source of energy efficiency class F
. Care

First disconnect the entire product from the power supply and allow it to cool down before carrying out
any cleaning or maintenance work on the product.

Clean the product regularly - only with a slightly damp, soft and lint-free cloth.
. Disposal

Waste electronic equipment must be taken to public collection points and must not be disposed of as
household waste.
LDBS Lichtdienst GmbH ǀ Chemnitzer Straße 8 ǀ 14612 Falkensee ǀ www.HEITRONIC.de
LED
1,5 W, 120 lm, 3000 K,
not replaceable
Drainage under the installation
housing, (e.g.: pebbles) so that no
water collects in the housing and can
drain off.
Use IP68 cable connectors!
Protection Protection
type class
IP 67 II
Be sure to use an IP68 cable connector.
Temperature changes in the stone can
cause moisture to be drawn in through
the insulation, which can damage the
luminaire.
4 / 20 10/23