Publicité
Les langues disponibles
Les langues disponibles
UNBOX YOUR BIKE
Cut the packaging straps using wire cutters
1.1
or a box cutter. Just make sure not to dam-
age the YT BikeBox. Now you can pull out
the flaps and open it.
Now you can lift your bike upwards, out of
1.3
the box.
0 6 y t
All manuals and user guides at all-guides.com
Lift the wheels out of the box. Put the wheels
1.2
in a safe place on the side of the box.
TIP: keep the box and the
packing materials for po-
tential future shipments
of your bike.
Place the frame on the front /rear axle stand.
1.4
Make sure the bike is standing safely!
HANDLEBAR ASSEMBLY 26"
Remove the cable ties using a wire cutter.
Install the handlebar. Mount the handlebar to
2.1.1
2.1.2
Remove the stem screws and put them aside
the stem.
(T25 Torx).
Make sure that the clamp gaps under the low-
2.1.4
er stem bolts are even, and that the handlebar
is correctly centered and aligned in the stem
– there are markings to assist you with this.
Torque all bolts precisely to the spec indicated
by the stem and/or handlebar manufacturer.
E13
Start with the uppermost bolts, torqueing
2.1.3
down the top part of the stem clamps ac-
cording to the manufacturer's specifications.
Take care not to leave a gap here (zero gap).
Only then should you secure the handlebar
with the lower bolts as well.
Please follow the
torque specifications of
the manufacturers.
y t 0 7
Publicité
