Etherma ET-14A Mode D'emploi page 23

6. Setting the temperatures (settings)
If you remain in one of these modes, the thermostat will operate
permanently in relation to this setting (no programming)
6.1 Defining the comfort setting
❶ Turn the selector knob to
❷ Set the Comfort temperature
(5°C to max. Comfort).
Configuration CF10
❸ Confirm with OK.
6.2 Defining the Economy setting
❶ Turn the selector knob to
❷ Set the Economy temperature
(5°C to max. Comfort).
❸ Confirm with OK.
6.3 Defining the
Frost protection setting
❶ Turn the selector knob to
❷ Set the Frost protection
temperature (5°C to max. Comfort).
❸ Confirm with OK.
.
2
1
5°C -> Confort max.
.
2
1
5°C -> + 19°C
.
2
1
5°C -> + 10°C
- 44 - - 44 -
6.4 Behavioural indicator
When the settings are adjusted, depending on the thermostat
model, the colour of the screen changes or an indicator is dis-
played according to the selected temperature.
3
Green up to 19°C (reduced consumption)
Orange from19.5°C to 24°C (average consumption)
3
Red from 24.5°C to max. comfort (High consumption)
To benefit from this function, according to the thermostat
model, activate the backlighting function (CF05).
3
OR
- 45 - - 45 -
EN