Publicité
Les langues disponibles
Les langues disponibles
•Clean upholstery using a warm, damp cloth
•Clean metal work with a soft cloth
•Do not use solvents to clean this product
•Check all parts and fixings are secure before each use
•Check for any damage before each use
•Do not use if there are signs of damage or excessive wear
•Ensure you follow all assembly diagrams/instructions
•You may need at least one person to help you with assembly
•Follow the order in which the diagrams/instructions are laid out
•Assemble finger tight in the beginning to allow for proper alignment. Once all fixings are
in place tighten fully.
•If this product has been supplied with nylon sleeves or bushings it is essential that these
are fitted onto the bolts so that the bolt passes through the nylon sleeve or bushing into
the nut & locks securely.
•Do not use the product until you are totally satisfied that it is assembled correctly and is
safe for use
•Check for full engagement of any locking pins & ensure all nuts and bolts are tight before
each use
•You must ensure that all parts and fixings are secure and safe before each use
•Ensure you follow all assembly diagrams/instructions
•You may need at least one person to help you with assembly
•Follow the order in which the diagrams/instructions are laid out
•Assemble finger tight in the beginning to allow for proper alignment. Once all fixings are
in place tighten fully.
•If this product has been supplied with nylon sleeves or bushings it is essential that these
are fitted onto the bolts so that the bolt passes through the nylon sleeve or bushing into
the nut & locks securely.
•Do not use the product until you are totally satisfied that it is assembled correctly and is
safe for use
•Check for full engagement of any locking pins & ensure all nuts and bolts are tight before
each use
•You must ensure that all parts and fixings are secure and safe before each use
You will need the following tools to assemble this product (not included):
•1 x
17mm Spanner (for M10 nuts)
•1 x
Rubber Mallet (for end caps)
•1 x
Adjustable Spannerarts and fixings are secure and safe before each use
CARE & MAINTENANCE
ASSEMBLY
WALL FIXING
TOOLS NEEDED
2
EN
Publicité
