Télécharger Imprimer la page

Hilti SID 6-22 Mode D'emploi page 27

Masquer les pouces Voir aussi pour SID 6-22:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 41
Care of the Li­ion batteries
• Never use a battery with clogged air vents. Clean the air vents carefully using a dry, soft brush.
• Avoid unnecessary exposure of the battery to dust and dirt. Never expose the battery to high levels
of moisture (e.g. by being dipped in water or left in the rain).
If a battery has been soaked by moisture, treat it as a damaged battery. Isolate it in a non-flammable
container and consult Hilti Service.
• Keep the battery free of extraneous oil and grease. Do not permit dust or dirt to accumulate
unnecessarily on the battery. Clean the battery with a dry, soft brush or a clean, dry cloth. Do not
use cleaning agents containing silicone as these can attack the plastic parts.
Do not touch the contacts of the battery and do not remove the factory-applied grease from the
contacts.
• Use only a slightly damp cloth to clean the housing. Do not use cleaning agents containing silicone
as these can attack the plastic parts.
Maintenance
• Check all visible parts and controls for signs of damage at regular intervals and make sure that
they all function correctly.
• Do not use the product if signs of damage are found or if parts malfunction. Immediately have the
product repaired by Hilti Service.
• After cleaning and maintenance, install all guards and protective devices and check that they are
in full working order.
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables.
Spare parts, consumables and accessories approved by Hilti for use with your product can be
found at your Hilti Store or online at: www.hilti.group
Transport and storage of cordless tools and batteries
Transport
CAUTION
Accidental starting during transport !
Always transport your products with the batteries removed!
Remove the battery/batteries.
Never transport batteries loose and unprotected. During transport, batteries should be protected
from excessive shock and vibration and isolated from any conductive materials or other batteries
that may come in contact with the terminals and cause a short circuit. Comply with the locally
applicable regulations for transporting batteries.
Do not send batteries through the mail. Consult your shipper for instructions on how to ship
undamaged batteries.
Prior to each use and before and after prolonged transport, check the product and the batteries for
damage.
Storage
WARNING
Accidental damage caused by defective or leaking batteries !
Always store your products with the batteries removed!
Store the product and the batteries in a cool and dry place. Comply with the temperature limits
stated in the technical data.
Do not store batteries on the charger. Always remove the battery from the charger when the
charging operation has completed.
Never leave batteries in direct sunlight, on sources of heat, or behind glass.
*2274161*
2274161
23

Publicité

loading

Ce manuel est également adapté pour:

Sid 6-22 1